Qoutes Im Think Im In Love With You

5.50 5.50 GEN GEN-D3

Remember I take responsibility for the misuse of the tutorial.


Installing Custom GEN-D3 Firmware 5.50

Changes / Major developments in this regard GEN Custom Firmware-C and D2

Games that require Firmware 6.00 and higher operating and

GEN Fixed bugs C and D (increased compatibility with games)

The Store is still not working

Cautions Useful information

NOT USE THIS PROGRAM WITH TA088v3 PSP-2000 and PSP-3000. Brickeos causes. If you have installed a custom firmware always, obviously if you install this firmware.

If you have a theme installed, take it off and the default settings.

This install 5.50 GEN-D3 directly. You do not need to install GEN-D (details below). If you GEN-A or 5.00-M33, for example, I can install with this tutorial directly.

If you want you can to skip this step, it is rare that something happens to you, but you know that I am not responsible for any misuse of this tutorial

- For holders of Slim, you should make a copy of the Nand of your console for possible brickeo.

- For holders of FAT, you should have prepared a pandora battery for possible brick. Requirements

• A PSP FAT / SLIM with custom firmware installed:

"You must have 4.01 M33 or higher. If you have the 5.50 GEN-B1, B2 instalaos because it's NOT ok to B1.

Installing Custom Firmware 5.50 GEN-B2 (only if you have version 5.50 GEN-B1, if you have more than 4.01 M33 and 5.50 than GEN-B1 skip this step):

Before installing this UPDATE sure you have installed the CF 5.50 GEN-B.

Copy the contents of the Memorystick discharge.

Run the update from the PSP (Games / Memory Stick).

The Update will automatically exit to the XMB (desktop). Activate

VSH recovery menu from the menu.

Download CF Gen-B2 5.50

IF you have

• GEN-D, Gen-D2 must also follow this tutorial.

• A formatted Memory Stick, MagicGate preferably 4Gb or less it .

• The battery charged to 78% or higher (I personally recommend that it is at 100%)

• The following pack:

CFW 5.50 GEN-D3

1 - INSERTING FILES IN THE MEMORY STICK

Once downloaded the pack, unpack it and copy the PSP folder and file obtained 550.PBP in the root of our memory sticks. If you are prompted to overwrite, accept.

Once checked everything and seeing that everything is ready, we can move to the next part.

2 - FIRMWARE INSTALLATION PROCESS

If you already have everything ready, we go to Game - Memory Stick and start the update program:

Have patience to run. Will tell you to press "Enter" or "Exit." Press Enter:

Then you'll see everything you offer this installer. We will focus on updating, so choose the first option:

-Flash Install CFW 5.50 GEN-D3

The installation will start ... Have

PSP CONNECTED TO THE BATTERY CHARGER, NOT DURING QUITEIS, DO NOT TURN OFF THE PSP, do not touch anything Tranquilité KEEP IT ON THE DESKTOP OR ON A BASE, keep in mind ALL THIS BECAUSE I say PSP NOT BECOME A BRICK OR PAPERWEIGHT.

When prompted that the process is complete, it will tell you to press X to turn off the PSP.

5.50 GEN-D3 Installed!

3-end of the installation. CHECK.

When the PSP is turned off, wait 30 seconds and turn it on. You will have the Firmware 5.50 GEN-D3.

To check, go to Settings - System Ajuestes - System Information. I appear as GEN-D3 5.50

VERY IMPORTANT: I \u200b\u200bwould have gone because when I had a theme installed, once the installation is finished, I went to turn on the PSP and I have been blocked the initial menu (XMB). If you pass this, turn off the PSP completely (easy, remove the battery and put it), then again and agree to maintain recovery pulsed R. Once there, we go to Advanced (Advanced) - Format flash1 and restore settings (format flash1 and restore settings). So, we already work well

If you configure your games load recovery. In the advanced, be sure to have the M33 Driver put in UMD ISO Mode. Source
http://www.espalpsp.com/
(or otherwise) and http://www.pspain.com/ http://pspstation.org/ . Thanks.